SenseiCTL

SenseiCTL is an unofficial configuration tool for the SteelSeries Sensei Raw Gaming Mouse under linux and is based on RivalCTL. This peripheral nor any other product made by SteelSeries, has official Linux support today. The tool is limited in it’s functionality, since everything had to be reverse-engineered.

Installation

Requirements:

Required:
pyudev>=0.16
webcolors>=1.4
ioctl-opt>=1.2
PyYAML==3.11

Optional (for the experiments):
psutil==3.4.2
six==1.10.0

Write permission to the device is required as well

Manual Installation:

git clone https://github.com/dneto/senseictl.git
sudo python setup.py install

Usage

usage: senseictl [-h] [--commit] [--reset] [--profile PROFILE]
                 [--led-style STYLE] [--led-intensity INTENSITY] [--cpi1 CPI]
                 [--cpi2 CPI] [--polling-rate RATE]

A tool to configure the SteelSeries RAW Gaming Mouse
optional arguments:
  -h, --help            show this help message and exit
  --commit              Save to firmware
  --reset               Reset all options to FACTORY defaults
  --profile PROFILE     profile name or path to file
  --led-style STYLE     LED Style [1=Steady, 2-4=Breathe Speed, 5=On Click]
  --led-intensity INTENSITY
                        LED Intensity [1=Off, 2=Low, 3=Medium, 4=High]
  --cpi1 CPI            50-6500 in increments of 50 [default 800]
  --cpi2 CPI            50-6500 in increments of 50 [default 1600]
  --polling-rate RATE   1000, 500, 250, or 125 [default=1000]

Source: GitHub – dneto/senseictl: Linux commandline tools to configure the SteelSeries Sensei Raw Gaming Mouse