>> AT+CGATT=1   - Attach to GPRS Service 
<< OK 

>> AT+CGDCONT=1,"IP","wap.cingular"   - Define PDP Context (cid, PDP type, APN) 
<< OK 

>> AT+CDNSCFG="208.67.222.222","208.67.220.220" - Configure Domain Name Server (primary DNS, secondary DNS) 
<< OK 

>> AT+CSTT="wap.cingular","wap(at)cingulargprs.com","cingular1" - Start Task & set APN, User ID, and password 
<< OK 

>> AT+CIICR     - Bring up wireless connection with GPRS - THIS MAY TAKE A WHILE 
<< OK 

>> AT+CIFSR      - Get Local IP address 
<< 10.190.245.172   - returns IP address assigned to your module 
<< OK 

>> AT+CIPSTATUS      - Get Connection Status 
<< OK 
<< STATE: IP STATUS   - returns status of connection, needs to be 'IP STATUS' before you can connect to a server

>> AT+CIPHEAD=1      - Tells module to add an 'IP Header' to receive data 
<< OK 

>> AT+CDNSORIP=1   - Indicates whether connection request will be IP address (0), or domain name (1) 
<< OK 

>> AT+CIPSTART="TCP","www.google.com","80" - Start up TCP connection (mode, IP address/name, port) 
<< OK 
<< CONNECT OK      - Indicates you've connected to the server - IT MAKE TAKE A WHILE FOR THIS TO BE RETURNED 

>> AT+CIPSEND      - Issue Send Command 
<< >                   - wait for module to return'>' to indicate it's ready to receive data 
>> GET / HTTP/1.1   - Send data - this example is an HTTP request for the default page 
>> Host: [url]www.google.com[/url] 
>> Connection: Keep-Alive 
>> Accept: */* 
>> Accept-Language: en-us 
>> 
<< data from server returned - Server will return data here