Anyone having screen flickering problems with there note 12.2 pro tablet will need to do a refresh install of kit kat. The Samsung rep at best buy did that for me and it seemed to have solved my screen flickering problem. It’s a softwear issue but can be fixed with a simple update from kit kat. Just a FYI to everyone.

Source: screen flickering problems galaxie note pro 12.2 problem resolved – Android Forums at AndroidCentral.com

I’ve got a rooted Samsung Galaxy NotePro 12.2 that has recently begun going into a reboot loop whenever the battery voltage dropped below a certain percentage. The first time it happened, the battery voltage had dropped to 55%. After getting home two hours later (I was traveling), and resetting the tablet (had to to get in. The tablet wouldn’t accept the pin number any longer), I ran the battery down again to see if I could duplicate the problem and began rebooting when the battery voltage dropped to less than 85%. I scoured the internet for solutions and didn’t have much luck.I did find all the recommendations to re-calibrate the battery and repair the battery and also several articles which said re-calibrating wouldn’t help. I ran the battery repair and the re-cal anyway (I’ve been a certified electronics technician since the 1980’s. I learned along time ago, the “experts” aren’t always right) and did see some minor improvement. Now, the tablet doesn’t begin rebooting until the battery drops below 65%.Once the tablet begins the reboot loop, I cannot turn it off by pressing and holding the power button regardless the length of time I keep it depressed. To get the reboot loop to stop, I have to plug the tablet into the charger.I have been unable to find any kind of batterystats.bin file anywhere on the phone though I have found the battery doctor’s file.I’m at a loss as to why this has begun happening. Has anyone else seen this problem? Anyone have any suggestions?Thank you in advance

Source: samsung galaxy note pro 12.2 reboots continuously when the battery drops below 70% | Android Authority Forums

You can do it from the command line as well. No need to install anything.Find the name of the device of the plugged in SD-card. For instance I typed ls -la /dev/sd* before and after plugging in the sd-card. I saw the date of /dev/sdc change and thus decided that that was the one.Find the place of the unzipped image, which was /home/username/Downloads/2012-10-28-wheezy-raspbian.img for me.Type the following (mutatis mutandis):sudo dd if=/home/username/Downloads/2012-10-28-wheezy-raspbian.img of=/dev/sdcor with improvements suggested by other users:sudo dd if=/home/username/Downloads/2012-10-28-wheezy-raspbian.img of=/dev/sdc status=progress bs=4Mand wait for the command to return. It may be quite a while, especially over usb2.Resizing can be done from the Pi itself in the raspi-config program that starts automatically the first time you boot.Be careful. Make absolutely sure the device name is that of the SD-card. If you replace it with the device name of your hard drive, your hard drive will be overwritten.

Source: How can I burn a Raspberry Pi image to SD card from Ubuntu? – Ask Ubuntu

Open Embedded Linux Entertainment Center, or OpenELEC for short, is a small Linux distribution. Built from the ground up as a small platform to run software like XBMC. This is done to leave a small footprint as possible. And increase the quality of your experience in total.

Source: OpenELEC Mediacenter – Download

I integrated the fixes to get the YouTube and Vimeo addon working in Gotham Beta 2. I uploaded the addons with the fixes. Just uninstall your current addons and manually re-install with the fixed addons. For the YouTube addon, it’s advised to delete the cookie “yt-cookiejar.txt” located in the following folder: xbmc/userdata/addon_data/plugin.video.youtube. For windows user’s, you’ll find the xbmc folder in C:\Users\UserAccount\AppData\Roaming.DOWNLOAD LINK: https://www.mediafire.com/folder/ie3ammajgrc2o/xbmc_addonsLIST OF FIXES APPLIEDYOUTUBE FIXESTo solve the login problems, I added the fix from this post: Reply #52. If you continue to have login problems, you may have to find a different fix.To fix a problem with VEVO videos not playing, as well as certain videos added to favorites not playing, I added the YouTubePlayer.py from this post: Reply #217VIMEO FIXESTo get Vimeo working in Gotham Beta 2 I added the fixes found in this post: Post #256, and added the VimeoPlayer.py found in this post: Post #240Thanks to all that fix and post ways to resolve broken addons

Source: [depricated] old YouTube Plugin – XBMC 13.0 Frodo/Gotham only

Factory Reset Help ‎2013-09-13 01:10 PM Hello, I’m new to this so please bear with me……..I have been trying to update the firmware on my ReadyNAS Duo V2 from 5.3.7 to 5.3.8. I have tried to update it using the Dashboard but this did not work, so I tried to download the file and do it locally…..this did not work 😡 So I tried to use another computer….same process dashboard and then local but this didn’t work either. So finally I brought it to work with me and tried it on our network here. In all in

Source: Factory Reset Help – NETGEAR Communities

Netgear Community

Source: ReadyNAS NV+ (sparc) – OS Partition 100% – How to … – NETGEAR Communities

Corrupted admin pages — no admin access ‎2014-07-19 03:57 PM ADMIN WEB PAGES ARE CORRUPTED AND PROVIDE NO ACCESS. The corruption is linked to and moves with the user data. My data shares are there, but I cannot administer my ReadyNAS NV+ v1 because the admin pages are non-functional. The admin pages look like a partial load — lots of blank space, graphics and color mostly missing, lots of recognizable text, even some labeled buttons, but nothing works.

Source: Corrupted admin pages — no admin access – NETGEAR Communities

Netgear Community

Source: Frontview missing images / JS after USB Recover – NETGEAR Communities

I have a folder a/ and a remote folder A/.I now run something like this on a Makefile:get-music: rsync -avzru server:/media/10001/music/ /media/Incoming/music/put-music: rsync -avzru /media/

Source: file – Two way sync with rsync – Stack Overflow

NFS, or Network File System, is a distributed file system protocol that allows you to mount remote directories on your server. This allows you to leverage storage space in a different location and to write to the same space from multiple servers. NFS

Source: How To Set Up an NFS Mount on Ubuntu 16.04 | DigitalOcean